Chemically Engineered Synthetic Lipid Vesicles for Sensing
Engineered liposomes as biosensors and drug delivery vehicles
Chemically Engineered Synthetic Lipid Vesicles for Sensing
Chemically Engineered Synthetic Lipid Vesicles for Sensing
Engineered liposomes as biosensors and drug delivery vehicles
Defining the Value of Injection Current and Effective Electrical Contact Area for EGaIn-Based Molecular Tunneling Junctions
Department of Chemistry and Chemical Biology,Harvard University, Cambridge, Massachusetts 02138,United States
J. Am. Chem. Soc., Article ASAP
DOI: 10.1021/ja408652h
Publication Date (Web): November 4, 2013
Copyright © 2013 American Chemical Society
Analysis of rates of tunneling across self-assembled monolayers (SAMs) of n-alkanethiolates SCn (with n = number of carbon atoms) incorporated in junctions having structure AgTS-SAM//Ga2O3/EGaIn leads to a value for the injection tunnel current density J0 (i.e., the current flowing through an ideal junction with n = 0) of 103.6±0.3 A·cm–2 (V = +0.5 V). This estimation of J0 does not involve an extrapolation in length, because it was possible to measure current densities across SAMs over the range of lengths n = 1–18. This value of J0 is estimated under the assumption that values of the geometrical contact area equal the values of the effective electrical contact area. Detailed experimental analysis, however, indicates that the roughness of the Ga2O3 layer, and that of the AgTS-SAM, determine values of the effective electrical contact area that are 
10–4 the corresponding values of the geometrical contact area. Conversion of the values of geometrical contact area into the corresponding values of effective electrical contact area results in J0(+0.5 V) = 107.6±0.8A·cm–2, which is compatible with values reported for junctions using top-electrodes of evaporated Au, and graphene, and also comparable with values of J0 estimated from tunneling through single molecules. For these EGaIn-based junctions, the value of the tunneling decay factor β (β = 0.75 ± 0.02 Å–1; β = 0.92 ± 0.02 nC–1) falls within the consensus range across different types of junctions (β = 0.73–0.89 Å–1; β = 0.9–1.1 nC–1). A comparison of the characteristics of conical Ga2O3/EGaIn tips with the characteristics of other top-electrodes suggests that the EGaIn-based electrodes provide a particularly attractive technology for physical-organic studies of charge transport across SAMs.
10–4 the corresponding values of the geometrical contact area. Conversion of the values of geometrical contact area into the corresponding values of effective electrical contact area results in J0(+0.5 V) = 107.6±0.8A·cm–2, which is compatible with values reported for junctions using top-electrodes of evaporated Au, and graphene, and also comparable with values of J0 estimated from tunneling through single molecules. For these EGaIn-based junctions, the value of the tunneling decay factor β (β = 0.75 ± 0.02 Å–1; β = 0.92 ± 0.02 nC–1) falls within the consensus range across different types of junctions (β = 0.73–0.89 Å–1; β = 0.9–1.1 nC–1). A comparison of the characteristics of conical Ga2O3/EGaIn tips with the characteristics of other top-electrodes suggests that the EGaIn-based electrodes provide a particularly attractive technology for physical-organic studies of charge transport across SAMs.Single-Molecule Tracking of Polymer Surface Diffusion
Department of Chemical and Biological Engineering,University of Colorado Boulder, Boulder, Colorado 80309, United States
J. Am. Chem. Soc., Article ASAP
DOI: 10.1021/ja407396v
Publication Date (Web): November 10, 2013
Copyright © 2013 American Chemical Society
The dynamics of polymers adsorbed to a solid surface are important in thin-film formation, adhesion phenomena, and biosensing applications, but they are still poorly understood. Here we present tracking data that follow the dynamics of isolated poly(ethylene glycol) chains adsorbed at a hydrophobic solid–liquid interface. We found that molecules moved on the surface via a continuous-time random walk mechanism, where periods of immobilization were punctuated by desorption-mediated jumps. The dependence of the surface mobility on molecular weight (2, 5, 10, 20, and 40 kg/mol were investigated) suggested that surface-adsorbed polymers maintained effectively three-dimensional surface conformations. These results indicate that polymer surface diffusion, rather than occurring in the two dimensions of the interface, is dominated by a three-dimensional mechanism that leads to large surface displacements and significant bulk–surface coupling.
The Role of Surface Oxygen in the Growth of Large Single-Crystal Graphene on Copper
Science 8 November 2013:
Vol. 342 no. 6159 pp. 720-723
DOI: 10.1126/science.1243879
Vol. 342 no. 6159 pp. 720-723
DOI: 10.1126/science.1243879
The growth of high-quality single crystals of graphene by chemical vapor deposition on copper (Cu) has not always achieved control over domain size and morphology, and the results vary from lab to lab under presumably similar growth conditions. We discovered that oxygen (O) on the Cu surface substantially decreased the graphene nucleation density by passivating Cu surface active sites. Control of surface O enabled repeatable growth of centimeter-scale single-crystal graphene domains. Oxygen also accelerated graphene domain growth and shifted the growth kinetics from edge-attachment–limited to diffusion-limited. Correspondingly, the compact graphene domain shapes became dendritic. The electrical quality of the graphene films was equivalent to that of mechanically exfoliated graphene, in spite of being grown in the presence of O.
Folding Paper-Based Lithium-Ion Batteries for Higher Areal Energy Densities
Qian Cheng †, Zeming Song †, Teng Ma ‡, Bethany B. Smith †, Rui Tang §, Hongyu Yu §, Hanqing Jiang ‡, and Candace K. Chan *†
Nano Lett., 2013, 13 (10), pp 4969–4974
DOI: 10.1021/nl4030374
Publication Date (Web): September 23, 2013
Copyright © 2013 American Chemical Society
Paper folding techniques are used in order to compact a Li-ion battery and increase its energy per footprint area. Full cells were prepared using Li4Ti5O12 and LiCoO2 powders deposited onto current collectors consisting of paper coated with carbon nanotubes. Folded cells showed higher areal capacities compared to the planar versions with a 5 × 5 cell folded using the Miura-ori pattern displaying a 14× increase in areal energy density.
Nano Lett., 2013, 13 (10), pp 4969–4974
DOI: 10.1021/nl4030374
Publication Date (Web): September 23, 2013
Copyright © 2013 American Chemical Society
Paper folding techniques are used in order to compact a Li-ion battery and increase its energy per footprint area. Full cells were prepared using Li4Ti5O12 and LiCoO2 powders deposited onto current collectors consisting of paper coated with carbon nanotubes. Folded cells showed higher areal capacities compared to the planar versions with a 5 × 5 cell folded using the Miura-ori pattern displaying a 14× increase in areal energy density.
Lithographically Defined Macroscale Modulation of Lateral Fluidity and Phase Separation Realized via Patterned Nanoporous Silica-Supported Phospholipid Bilayers
Eric L. Kendall †, Viviane N. Ngassam ‡, Sean F. Gilmore §, C. Jeffrey Brinker , and Atul N. Parikh *†‡§
J. Am. Chem. Soc., Article ASAP
DOI: 10.1021/ja408434r
Publication Date (Web): October 10, 2013
Copyright © 2013 American Chemical Society
Using lithographically defined surfaces consisting of hydrophilic patterns of nanoporous and nonporous (bulk) amorphous silica, we show that fusion of small, unilamellar lipid vesicles produces a single, contiguous, fluid bilayer phase experiencing a predetermined pattern of interfacial interactions. Although long-range lateral fluidity of the bilayer, characterized by fluorescence recovery after photobleaching, indicates a nominally single average diffusion constant, fluorescence microscopy-based measurements of temperature-dependent onset of fluidity reveals a locally enhanced fluidity for bilayer regions supported on nanoporous silica in the vicinity of the fluid–gel transition temperature. Furthermore, thermally quenching lipid bilayers composed of a binary lipid mixture below its apparent miscibility transition temperature induces qualitatively different lateral phase separation in each region of the supported bilayer: The nanoporous substrate produces large, microscopic domains (and domain-aggregates), whereas surface texture characterized by much smaller domains and devoid of any domain-aggregates appears on bulk glass-supported regions of the single-lipid bilayer. Interestingly, lateral distribution of the constituent molecules also reveals an enrichment of gel-phase lipids over nanoporous regions, presumably as a consequence of differential mobilities of constituent lipids across the topographic bulk/nanoporous boundary. Together, these results reveal that subtle local variations in constraints imposed at the bilayer interface, such as by spatial variations in roughness and substrate adhesion, can give rise to significant differences in macroscale biophysical properties of phospholipid bilayers even within a single, contiguous phase.
J. Am. Chem. Soc., Article ASAP
DOI: 10.1021/ja408434r
Publication Date (Web): October 10, 2013
Copyright © 2013 American Chemical Society
Using lithographically defined surfaces consisting of hydrophilic patterns of nanoporous and nonporous (bulk) amorphous silica, we show that fusion of small, unilamellar lipid vesicles produces a single, contiguous, fluid bilayer phase experiencing a predetermined pattern of interfacial interactions. Although long-range lateral fluidity of the bilayer, characterized by fluorescence recovery after photobleaching, indicates a nominally single average diffusion constant, fluorescence microscopy-based measurements of temperature-dependent onset of fluidity reveals a locally enhanced fluidity for bilayer regions supported on nanoporous silica in the vicinity of the fluid–gel transition temperature. Furthermore, thermally quenching lipid bilayers composed of a binary lipid mixture below its apparent miscibility transition temperature induces qualitatively different lateral phase separation in each region of the supported bilayer: The nanoporous substrate produces large, microscopic domains (and domain-aggregates), whereas surface texture characterized by much smaller domains and devoid of any domain-aggregates appears on bulk glass-supported regions of the single-lipid bilayer. Interestingly, lateral distribution of the constituent molecules also reveals an enrichment of gel-phase lipids over nanoporous regions, presumably as a consequence of differential mobilities of constituent lipids across the topographic bulk/nanoporous boundary. Together, these results reveal that subtle local variations in constraints imposed at the bilayer interface, such as by spatial variations in roughness and substrate adhesion, can give rise to significant differences in macroscale biophysical properties of phospholipid bilayers even within a single, contiguous phase.
Subscribe to:
Posts (Atom)