Optical Motion Control of Maglev Graphite


Masayuki Kobayashi  and Jiro Abe *
 Department of Chemistry, School of Science and Engineering, Aoyama Gakuin University, 5-10-1 Fuchinobe, Chuo-ku, Sagamihara, Kanagawa 252-5258, Japan
 CREST, Japan Science and Technology Agency, K’s Gobancho, 7 Gobancho, Chiyoda-ku, Tokyo 102-0076, Japan
J. Am. Chem. Soc., Article ASAP
DOI: 10.1021/ja310365k
Publication Date (Web): December 12, 2012
Copyright © 2012 American Chemical Society

Graphite has been known as a typical diamagnetic material and can be levitated in the strong magnetic field. Here we show that the magnetically levitating pyrolytic graphite can be moved in the arbitrary place by simple photoirradiation. It is notable that the optical motion control system described in this paper requires only NdFeB permanent magnets and light source. The optical movement is driven by photothermally induced changes in the magnetic susceptibility of the graphite. Moreover, we demonstrate that light energy can be converted into rotational kinetic energy by means of the photothermal property. We find that the levitating graphite disk rotates at over 200 rpm under the sunlight, making it possible to develop a new class of light energy conversion system.

Conformational Control of Energy Transfer: A Mechanism for Biocompatible Nanocrystal-Based Sensors†


  1. Dr. Euan R. Kay1,2,‡
  2. Jungmin Lee1,‡,
  3. Prof. Daniel G. Nocera1
  4. Prof. Moungi G. Bawendi1,*
DOI: 10.1002/anie.201207181






Know when to fold ’em: Combination of a pH-triggered oligonucleotide conformational switch with fluorescent nanocrystals gives a sensitive pH nanosensor (see scheme). Analyte-dependent conformational changes control the distance between the nanocrystal energy donor (green) and a FRET acceptor (red), which results in a reporter for pH values in individual endosomes of living cells.

Cytoplasmic ATP Hydrolysis Powers Transport of Lipopolysaccharide Across the Periplasm in E. coli



  1. Daniel Kahne1,2,*


ABSTRACT

Millions of molecules of lipopolysaccharide (LPS) must be assembled on the Escherichia coli cell surface each time the cell divides. The biogenesis of LPS requires seven essential lipopolysaccharide transport (Lpt) proteins to move LPS from the inner membrane through the periplasm to the cell surface. However, no intermediate transport states have been observed. We developed methods to observe intermediate LPS molecules bound to Lpt proteins in the process of being transported in vivo. Movement of individual LPS molecules along these binding sites required multiple rounds of adenosine triphosphate (ATP) hydrolysis in vitro, which suggests that ATP is used to push a continuous stream of LPS through a transenvelope bridge in discrete steps against a concentration gradient.
Published Online November 8 2012
Science
Vol. 338 no. 6111 pp. 1214-1217 
DOI: 10.1126/science.1228984

Touring the Tomato: A Suite of Chemistry Laboratory Experiments

J. Chem. Educ.
DOI: 10.1021/ed3004148
Publication Date (Web): December 14, 2012


An eight-session interdisciplinary laboratory curriculum has been designed using a suite of analytical chemistry techniques to study biomaterials derived from an inexpensive source such as the tomato fruit. A logical progression of research-inspired laboratory modules serves to "tour" the macroscopic characteristics of the fruit and the submicroscopic properties of its constituent cuticular biopolymers by atomic force microscopy (AFM), UV–visible, and nuclear magnetic resonance (NMR) methods at increasingly detailed molecular levels. The modular curriculum can be tailored for specialty undergraduate courses or summer high school workshops. By applying analytical tools to investigate biopolymers, making connections between molecular and microscale structure, and linking both structural regimes to the functional properties of natural polymers, groundwork is established for further student investigations at the interface of chemistry with biology or chemical engineering.

Video: Curiosity's Revolutionary Experiments


Curiosity's Revolutionary Experiments


Active dielectric antenna on chip for spatial light modulation


Active dielectric antenna on chip for spatial light modulation



Integrated photonic resonators are widely used to manipulate light propagation in an evanescently-coupled waveguide. While the evanescent coupling scheme works well for planar optical systems that are naturally waveguide based, many optical applications are free-space based, such as imaging, display, holographics, metrology and remote sensing. Here we demonstrate an active dielectric antenna as the interface device that allows the large-scale integration capability of silicon photonics to serve the free-space applications. We show a novel perturbation-base diffractive coupling scheme that allows a high-Q planer resonator to directly interact with and manipulate free-space waves. Using a silicon-based photonic crystal cavity whose resonance can be rapidly tuned with a p-i-n junction, a compact spatial light modulator with an extinction ratio of 9.5 dB and a modulation speed of 150 MHz is demonstrated. Method to improve the modulation speed is discussed.

Energy: Clean stoves already in use in rural India


Nature
 
491,
 
333
 
(15 November 2012)
 
doi:10.1038/491333b
Published online
 

Counting primary loops in polymer gels


Huaxing Zhou a, Jiyeon Woo a, Alexandra M. Cok a, Muzhou Wang b, Bradley D. Olsen b, and Jeremiah A. Johnson a,1Departments of a Chemistry and b
Chemical Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139
Edited by David A. Weitz, Harvard University, Cambridge, MA, and approved October 9, 2012 (received for review July 31, 2012)


Much of our fundamental knowledge related to polymer networks is
built on an assumption of ideal end-linked network structure. Real
networks invariably possess topological imperfections that negatively affect mechanical properties; modifications of classical network theories have been developed to account for these defects.
Despite decades of effort, there are no known experimental protocols for precise quantification of even the simplest topological
network imperfections: primary loops. Here we present a simple
conceptual framework that enables primary loop quantification in
polymeric materials. We apply this framework to measure the
fraction of primary loop junctions in trifunctional PEG-based hydrogels. We anticipate that the concepts described here will open new
avenues of theoretical and experimental research related to polymer
network structure.

Synthetic Lipid Membrane Channels Formed by Designed DNA Nanostructures


  1. Friedrich C. Simmel1,
Science
Vol. 338 no. 6109 pp. 932-936 
DOI: 10.1126/science.1225624

ABSTRACT

We created nanometer-scale transmembrane channels in lipid bilayers by means of self-assembled DNA-based nanostructures. Scaffolded DNA origami was used to create a stem that penetrated and spanned a lipid membrane, as well as a barrel-shaped cap that adhered to the membrane, in part via 26 cholesterol moieties. In single-channel electrophysiological measurements, we found similarities to the response of natural ion channels, such as conductances on the order of 1 nanosiemens and channel gating. More pronounced gating was seen for mutations in which a single DNA strand of the stem protruded into the channel. Single-molecule translocation experiments show that the synthetic channels can be used to discriminate single DNA molecules.

Spontaneous Thermoreversible Formation of Cationic Vesicles in a Protic Ionic Liquid


Center for Neutron Science, Department of Chemical and Biomolecular Engineering, University of Delaware, Newark, Delaware 19716, United States
J. Am. Chem. Soc., Article ASAP
DOI: 10.1021/ja308975e
Publication Date (Web): October 3, 2012
Copyright © 2012 American Chemical Society


The search for stable vesicular structures is a long-standing topic of research because of the usefulness of these structures and the scarcity of surfactant systems that spontaneously form vesicles in true thermodynamic equilibrium. We report the first experimental evidence of spontaneous formation of vesicles for a pure cationic double tail surfactant (didodecyldimethylammonium bromide, DDAB) in a protic ionic liquid (ethylammonium nitrate, EAN). Using small and ultra-small angle neutron scattering, rheology and bright field microscopy, we identify the coexistence of two vesicle containing phases in compositions ranging from 2 to 68 wt %. A low density highly viscous solution containing giant vesicles (D 30 μm) and a sponge (L3) phase coexists with a dilute high density phase containing large vesicles (D  2.5 μm). Vesicles form spontaneously via different thermodynamic routes, with the same size distribution, which strongly supports that they exist in a true thermodynamic equilibrium. The formation of equilibrium vesicles and the L3 phase is facilitated by ion exchange between the cationic surfactant and the ionic liquid, as well as the strength of the solvophobic effect in the protic ionic liquid.

Coordination Chemistry and Antisolvent Strategy to Rare-Earth Solid Solution Colloidal Spheres

Department of Chemical and Biomolecular Engineering, Faculty of Engineering, National University of Singapore, 10 Kent Ridge Crescent, Singapore 119260
J. Am. Chem. Soc., Article ASAP
DOI: 10.1021/ja307280v
Publication Date (Web): October 23, 2012
Copyright © 2012 American Chemical Society



We have devised in this work a general synthetic strategy for preparation of single- and multicomponent rare-earth coordination polymer colloidal spheres (RE-CPCSs). This strategy is based on an integration of coordination chemistry and antisolvent effect for synchronized precipitation. Highly monodisperse RE-CPCSs with homogeneous mixing of RE elements, which are not readily attainable by any existing methods, have been successfully prepared for the first time. In addition, the type and molar ratio of these colloidal spheres can be adjusted easily in accordance to the variety and dosage of precursor salts. The molar ratio of RE elements in as-prepared colloidal spheres shows a linear relationship to that of starting reactants. Furthermore, the RE-based core/shell colloidal spheres can be facilely prepared by introducing other metal salts (beyond lanthanide elements) owing to their different coordination chemistry and precipitation behavior. By adjusting concentrations of the ionic activators, luminescent properties can be tuned accordingly. Moreover, the RE-CPCSs can be transformed to monodisperse lanthanide oxide spheres via simple heat treatment. We believe that the present synthetic strategy provides a viable route to prepare other lanthanide-containing colloidal spheres that have enormous potential for future applications as optoelectronic devices, catalysts, gas sensors, and solar cells.

Discovery of an Organic Trefoil Knot


  1. Jeremy K. M. Sanders1,*
Science
Vol. 338 no. 6108 pp. 783-785 
DOI: 10.1126/science.1227032


ABSTRACT

Molecular knots remain difficult to produce using the current synthetic methods of chemistry because of their topological complexity. We report here the near-quantitative self-assembly of a trefoil knot from a naphthalenediimide-based aqueous disulfide dynamic combinatorial library. The formation of the knot appears to be driven by the hydrophobic effect and leads to a structure in which the aromatic components are buried while the hydrophilic carboxylate groups remain exposed to the solvent. Moreover, the building block chirality constrains the topological conformation of the knot and results in its stereoselective synthesis. This work demonstrates that the hydrophobic effect provides a powerful strategy to direct the synthesis of entwined architectures.

Visualization of Latent Fingermarks by Nanotechnology: Reversed Development on Paper—A Remedy to the Variation in Sweat Composition


  1. Dr. Nimer Jaber, 
  2. Dr. Adam Lesniewski,
  3. Hadar Gabizon, 
  4. Sanaa Shenawi, 
  5. Prof. Daniel Mandler*
  6. Prof. Joseph Almog*
  1. Article first published online: 4 NOV 2012
    DOI: 10.1002/anie.201205259

    Angewandte Chemie International Edition


Don′t sweat it: “Negative” fingermarks are developed on paper by the application of gold nanoparticles (gold circles) that are capped by a bifunctional ligand, and then silver precipitation. In this process, paper is the substrate and the fingermarks serve as a mask. This approach may contribute to the successful recovery of latent fingermarks by law enforcement agencies.